What are the features of the three side seal zipper machine?

    Tell you the operation process of three side seal zipper machine:

   I. Preparation before starting the three-side seal zipper machine

   (1) Check whether there are dust and sundries around the equipment and deal with them. (2) Install the plastic film roll according to the requirement of production notice. (3)Adjust the size of plastic bag according to the production notice and process document, install the heat sealing knife, and adjust the position of slitting knife and heat sealing knife initially. (4)Turn on the power, set the temperature of heat sealing knife according to the requirement of process document. (5)Input the data related to bag making and the required quantity per bundle. (6)Select the edge of the pattern with large color difference and adjust the sensitivity of photo eye to meet the requirement.

   Second, three-side seal zipper machine start working

   (1) Start the main motor and run at low speed, then adjust the edge position control to divide the plastic film to the center position. (2) Adjust the left and right press wheels to align the left and right films, and adjust the front and rear press wheels to align the patterns. (3)Adjust the heat sealing knife to make the heat sealing within the required range of the plastic bag. (4)Adjust the slitting blade to the required position, and adjust the punching position to the scissor opening. (5) Initial adjustment of machine speed, take a flat sample bag for initial inspection, if not in line with the specified requirements, and then take a flat sample bag for heat sealing value test. (6) Organize the production of plastic bags, select the bags with quality defects in accordance with the provisions of the bundle. (7) Machine quality inspector inspection, after passing the inspection, paste the certificate of conformity and send it to the quality inspection room for sampling. (8) In the production process, observe the bag-making situation at any time, find anomalies, adjust immediately.

   Three, three side seal zipper machine stop working

   (1) Disconnect the main power switch, and then disconnect the power switch of each part. (2) Clean the machine hygiene and site hygiene, and send the products to the general inspection room. (3)Make a good record of the shift, which is required to be accurate and clean.

   There are many features of three side seal zipper machine. I summarize them as follows:

   1、The whole machine adopts imported PLC and centralized control by human-machine interface. Stable performance, easy operation and maintenance. The operation interface can be switched between Chinese and English.

   2、Human-machine interface real-time display of all parameters, can be preset bag-making speed, bag length, temperature, number of branches, finished product delivery and so on.

   3、LPC automatic deskewing, double photoelectric tracking discharge, automatic constant tension control, AC frequency conversion constant speed automatic feeding.

   4、Imported double servo drag control.

   5、Adopting AC frequency conversion motor drive, up and down sealing pressure.

   6、Temperature is regulated by PID, adjustable from 0 to 300℃, contactless automatic control, centralized setting by man-machine interface.

   7、Temperature is centrally controlled by computer.

   8、Pneumatic multi-functional automatic punching, automatic edge removal, equipped with static electricity elimination device.

   9、Working mode: fixed-length bag making, photoelectric tracking bag making.

   10, punching mode: continuous, interval, stop, punching time can be preset.